List of publications on a keyword: «quality»

The theoretical and experimental results of the investigation of fixed abrasive polishing of ceramic are presented in the paper. The equations of the intensity of dispersion allowing to assess the performance and the accuracy of shaping by using related technological environment and the geometry of the lapping are given in the article.

The main task of methodological work at the university is to link into a single methodological block the entire system of scientific-methodological and organizational-methodological support of training areas at the Institute, and not just individual disciplines, to significantly improve the quality of bachelor's and master's training on this basis. The educational and methodological work provides for improving the quality of methodological training of the teaching staff, the development of thematic plans, methodological manuals and other methodological materials. The university should carry out systematic work on methodological support not only for individual academic disciplines, but also for educational processes that ensure the preparation of bachelor's and master's degrees.

Clinical and epidemiological data indicate the high medical and social significance of urological diseases for public health and determine the need to analyze problems in organizing the provision of specialized medical care to patients with a urological profile. The purpose of this work was a comparative analysis of indicative indicators of the urological department No. 3 of the City Clinical Hospital No. 1 named after N.I. Pirogov in order to improve the availability and quality of specialized medical care for this category of patients during the COVID-19 pandemic. An analysis of the work of the urological department in 2020 as a whole indicates its stable activity: there is an increase in the share of minimally invasive endoscopic technologies, radical surgeries, an increase in the range of treatment methods for urolithiasis through the further development of modern technologies, primarily using X-ray guidance methods.

The scientific research thoroughly examines TQM basic concepts. The results of change experiments in enterprise management system are shown. The analysis of problems in management system has been undertaken, the ways of solution of latter are described.

The article presents a study of how a game can change a person's life. At the beginning of the article, some variants of the concepts and meanings of the word “game” which are used in the article are provided. The following are examples of how the influence of the game on a person, their mood, emotional state and psyche in general can be studied. The mechanism that affects the consolidation of a new positive experience and the transformation that occurred in the game, is described. The mechanism that is embedded in our body, in physiology, is based on the production of hormones. It is through evaluating and observing the emotional state of the participants in the game that we can see how the game changes not only the emotional state of the participants, but also strengthens their resilience. Changes their very lives.

The article is devoted to substantiating the effectiveness of digital technologies in controlling the level of health quality indicators on the example of medical bracelets and fitness trackers. Digital technology has become an integral part of the modern health care system at different levels. The possibility of using such technologies to monitor the health status of almost any person has great promise, since at fairly low costs significant results are shown. Controlling the level of health quality indicators with the use of digital technologies can be used to prevent serious diseases and provide the necessary assistance to patients in time.

This article analyzes the physical education of preschool children. The main tasks assigned to the teacher for the development of physical education of preschool children are defined.

The article deals with the issue of optimizing the parameters of a non-driving rotary agitator to ensure high-quality operation of the unit and determines the rational values of the studied parameters in terms of the power intensity of the process.

The article is devoted to the consideration of methods of lean production in relation to mechanical-engineering enterprises; the main key indicators of efficiency, productivity and key performance indicators (KPI), their similarities and differences. The key performance indicators, the most preferred in the analysis and management of production at mechanical-engineering enterprises, are defined in the article.

The article defines the composition of quality indicators and presents their main characteristics that have a direct impact on the quality of innovative software products used in the economic sphere. Quantitative values ​​of these characteristics can be obtained using appropriate mathematical tools. Therefore, to assess the quality of innovative software products, it is proposed to use a multi-criteria expert system and mathematical tools using weighting coefficients of indicators and scoring their variable characteristics.

This monograph deals with the problem of threshing and grain separation in two-phase threshing device of the combine. During combine harvesting, high-quality seeds of soya fall into the total mass of the grain, pass through the entire threshing stage by the first and second drums, cleaning, crushing into halves and small parts and sorted out after post-harvest processing. The authors conclude that with this soybean harvesting technology, more than 50% of the seeds are not receiving the natural resource of yield gain, since the different-quality seeds are not separated or collected separately during the operation of the air-screen cleaning of the combine. According to earlier studies, soybean yield losses are 2.7–3.3 dt/ha.

В работе говорится, что производительность является долговременным фактором обеспечения устойчивого экономического роста и сохранения конкурентоспособности, как национальной экономики в целом, так и отдельных деловых единиц. Чтобы сохранить и упрочить свое рыночное положение, организации должны обеспечивать необходимое качество трудовой жизни, на которое влияют такие факторы, как уровень технологии, организация труда, стиль и методы управления производственными процессами. Поэтому поток инвестиций в человеческий капитал должен быть непрерывным. Тем не менее, практика функционирования российских организаций показывает, что в настоящее время нельзя говорить о полномасштабных инвестициях в человеческий капитал.

This article shows the need to use the capabilities of modern software systems that allow for situational modeling of the degradation of structure and fracture, as well as the main tasks that must be met through metrological support of production. Key words: parameters, metrology, process technology, information technology, quality control.

In the process of the research, a comparative analysis of the services provided by the Soyuz hotel company was made to meet the basic standards of hotel services. As a result, a number of problems were identified, both technical and functional quality, and social quality of services. In connection with these, methodological and practical recommendations were proposed to improve the quality system of the services provided.

The article deals with the method of collecting and processing the measuring information of the main static characteristics used to assess the quality and acceptability of measurement processes. The results of the analysis of the acceptability of the measuring process indicate the acceptability of this measuring process as a whole.

In the article modern problems of improvement of quality of management of technological development of the industrial enterprise are considered. A cyclic model of stages and types of technological development is proposed. Requirements are formulated for improving methods of managing technological development.

The key factors having an impact on decline in production of work and falling of level of quality of products in the aerospace industry are considered in the article. The analysis of dynamics of development of the aerospace industry is carried out, the statistical data characterizing position of the Russian aviation industry on the world scene are provided. Loudspeakers of the index of labor productivity are analyzed, its influence on quality of products of the industry is estimated. Interrelations are revealed and proved, the tendency to improvement of the situation in the industry is planned.

The article discusses the key points in the global economy associated with the main trends in product quality management. The purpose of the study is to identify the features of modern trends, their role and importance in the management of product quality. The author of the article came to the following conclusions: at present, enterprises are implementing quality management systems based on GOST R ISO 9001–2015, the «Zero Defects» program is used by F. Crosby in America; one of the most important management properties influences, that reflects a lot of good looks and positions, is considered to use the leading provisions of the concept of TQM. The research materials were the articles of such authors as O.N. Kolomyts, A. Topilin, G.N. Zaitsev, A.G. Gudkova, V.V. Prokhorov, Ye.N. Klochko, A.A. Mustafaev, as well as M.Yu. Kabulo-va. and E.I. Rekhviashvili.

Problems of quality of market economy are revealed, the main approaches to determination of category «quality» and levels of his assessment under to the ISO international standards of a series 9000 are considered in the article. The interrelation of economy and quality management, efficiency and quality of performance of production is disclosed, considering foreign and domestic experience. The main problem of quality which major factor is increase in the standard of living, economic, social and ecological security is considered.

Controlled knowledge and skills are the subject of consideration. In order to find a universal method of evaluation, elements of formative assessment, assessment using a skill test, and an open type task as a component of the student's overall learning system were analyzed on the basis of Russian language lessons. As a result, several tasks were formulated for formative evaluation, test, open-type tasks and criteria were developed. Such system of work can be used in school in Russian language lessons.

The article reveals the concept of public youth diplomacy. The importance of public youth diplomacy in creating a positive image of Russia and in the development of creative, communicative and leadership qualities of Russian youth is also analyzed in the work.

In this article the author considers interdepartmental interaction model in the field of extracurricular activities of students in the quality management system. The topic is examined on the example of the municipal state institution "Information and Methodological Center".

On the basis of analysis of federal state educational standards and studies on the design, optimality and efficiency of the learning process, a basic model of the educational process is proposed in the article, based on the block-modular approach and the mathematical graph theory. It is shown that during the process design and depending on the filling of modules and their meaning, this model can be transformed and useful not only in the development and analysis of work programs, but also reflect the development of the personality, including taking into account negative factors. The boundaries of the proposed model usage are determined. The question of introducing qualitative and quantitative grades of this model on the basis of graph theory for controlling bodies is considered. Advantages of the block-modular approach application to the creation of educational programs in conjunction with the application of the model of the proposed species are highlighted.

The article discusses the process of introducing quality management systems in educational institutions in accordance with various approaches to quality management: the model «ESG-ENQA», the model ISO 9001: 2015.

The article considers the existing objective functions and limitations in the optimization of the quality parameters of coke M₂₅ and M₁₀ according to the mathematical model. The shortcomings of the existing approach to the optimization of the quality indicators for coke M₂₅ and M₁₀ are shown. It was proposed to use the criterion M₁₀ as the objective function, rather than the set of parameters M₂₅ and M₁₀, as it was before, and also to refrain from restrictions on the parameters determined in the