List of publications on a keyword: «system»

In this article, inflation targeting in Russia is considered, taking into account international experience. The role of the key rate as the main instrument of monetary policy is analyzed. The study also deals with the benefits and shortcomings of the transition to inflation targeting in Russia.

Methods and approaches to assessing the risks of implementing projects implemented in the construction industry are discussed in the article. The key elements of the risk management information system are identified, which allow increasing business profitability through controlling procedures, development of risk register sheets, modeling and use of specialized software.

In Russia and CIS countries I operate road trains consisting of old trailers and semi-trailers not equipped with ABS systems, the development of inexpensive and easily mounted on trailers and semi-trailers of various designs of the device, which allows to signal the driver of the road train about movement with a blocked wheel, seems to be a pressing task.

A solution to the problem of developing an inexpensive and easily mounted on trailers and semi-trailers forestry road trains without interfering with the working brake system of the vehicle, a device that allows the driver of the road train to signal the movement with a locked wheel, is an urgent task. Based on the foregoing, the authors proposed and patented a technical solution to the formulated problem.

In this paper, information technology in e-business is considered. A classification of e-commerce and features of payment systems on the Internet are presented.

The article deals with the issue of using the latest information technologies in education and provides examples of using them in this field. The significance and effectiveness of implementing and using the information technology in Russian education are also analyzed in this article. The study suggests that information technologies in education allow using a greater number of teaching methods than traditional techniques, and that they are an innovative way to improve and organize the educational process.

В статье рассмотрено понятие механизма реализации прав человека. Изложены мнения ученых по поводу применения регулятивно-функциональных характеристик юридических фактов к теории и практике реализации прав человека, определения механизма осуществления не только естественных субъективных прав, но и одновременно юридических обязанностей управомоченного субъекта.

Modern shipbuilding is a diversified industry, which includes the construction of ship hulls, machinery and equipment, as well as a number of related products. Shipbuilding is characterized by unfavorable working conditions, the presence of dangerous and harmful factors leading to work–related injuries, general and occupational morbidity. In recent years, the shipbuilding and ship repair industry, which was largely dependent on ups and downs in the economy, has experienced extremely difficult times. It is possible that the improvement of the economic situation in the field of shipbuilding and ship repair will serve as a reason for reviewing the organization of occupational safety at the level of countries and companies, and will also contribute to the general improvement of working conditions in this important industry.

This article describes possibilities of CIS, difficulties in system installation, main installation steps, rialto of CIS, features of using these systems in chemistry industry.

In the paper the proper constitutions of Aristotle's "Politics" are compared. The author concludes that Aristotle preferred aristocracy and polity which are much alike. Being a realist Aristotle knew that aristocracy and polity were rear in practice and not suitable for all the nations.

The system approach implemented by Petrozavsk State University in the formation of end-to-end processes of procurement - transportation of food raw materials and production of functional food products is considered.

The question concerning the existence of the gravitational force of Galaxies is put in doubt by the authors of the article. The article deals with the fact that gravity is mutual magnitude, if the mass of one of the bodies is close to zero, and the force of gravity common to the two bodies tends to zero. One body does not have gravity. Also, in the article, the authors attempt to prove that the Sun and Jupiter have a huge force, since they are massive bodies in themselves and they also move at low speeds. The authors come to the conclusion that if the Galaxy had gravity, all its stars would have been knocked together long ago. The authors also prove that friction forces always exist. And the frictional forces prevent even rectilinear motion by inertia, the body will stop, continuing to rotate around its axis, if the body has satellites. The authors emphasize that if the body moves, it means that there is someone who moves now, or there is, or was someone who moved before, and it, those-lo, moves by inertia.

The article considers the role of the satellite navigation system GLONASS in rail transport to ensure a higher-quality level of traffic management and increase in the safety of train traffic. This system is the basis for the long-term development of the industry, which involves the transition to rapid and high-speed traffic on the railway.

The article "Implementation of the system-activity approach in teaching mathematics in the conditions of transition to the Federal State Educational Standards LLC" reveals the features of the system-activity approach and ways to implement it in line with the use of technology for the development of critical thinking. The focus is on methodological techniques: cluster, insert, sinwain, etc.

This article examines the role of the English language in modern communication between people and how the problem of pronunciation affects perception. The author investigates the functions of intonation, describes the pronunciation peculiarities, offers methods on its effective mastering and renders difficulties that are usually faced by learners.

The relevance of this article is due to the lack of improvement in tax legislation to account for the largest taxpayers, despite the fact that tax revenues account for more than half of all revenues to the budget. At the present stage, the tax administration system should simultaneously ensure: an increase in the level of tax collection, a reduction in the costs of taxpayers, the creation of convenient conditions for the performance of tax payment duties, and observance of the principle of equity. The article discusses the comparison of selection criteria for the largest taxpayers at the federal and regional levels.

In given article the technique of planning of carrying out of research and development on the basis of the volume determined models is described. Basically, the problems concerning top level of hierarchy, namely, problems of definition of the schedule chart of realization of the basic stages of research and development and volumes of expenses necessary for it are considered. The most effective and modern approach to realization of such substantiation is use of mathematical models. It is thus essential that the models applied to the decision of problems of this level, should consider not only internal properties of the enterprise are models of its organizational system, but also consider with accessible completeness of property of environment of the enterprise. As this completeness is rather limited, in view of incompleteness of the information on properties of environment of the enterprise, the planning technique should provide possibility of correction of planned offers, their recalculation under the specified data.

The article presents the main provisions of obtaining stable water-dispersion coloring systems for coniferous wood. The paint technology uses polymer dispersions, which differ not only in the nature of the film-forming agent, but also in stabilization systems, lyophilicity, film-forming ability. For the choice of film-forming substance, for the painting of coniferous wood, it is necessary to take into account the main technical characteristics of polymer dispersions and their properties. The main directions of development of the LCP technology are the improvement of decorative and operational properties of coatings through the development of new materials and methods of their application, reducing the use of harmful substances.

The article deals with the stages of development of management accounting, the points of view of various authors, justified the need for quality management information, which has an impact on the development of cost accounting as its own economic information system of enterprises of various forms of ownership

This article describes: the history of appearance and development of Guinea pigs, provides an explanation of the etymology of the concept of "Guinea pig", the order and conditions of their feeding, a detailed study of feed, in order to analyze the effects of consumption of plant components and food additives included in feed and feedings, as well as determine their impact on the body and health of Guinea pigs

There are BPM (Business Process Management) specialized systems in any medical organization that help companies manage their processes, create graphical diagrams, analyze and improve the structure of an organization. BPM systems are a kind of “tool that allows not only to increase the efficiency of the workflow, but also to optimize management systems. This article focuses on one of these systems, the most commonly used in medical practice, the Robomed system. The purpose of the work is to analyze system - Robomed. The author of the article draws particular attention to identifying its strengths and weaknesses, considering its structure and aspects that make it possible to increase the efficiency of the organization.

The part of the training of highly qualified specialists in the field of automation is the use of training and laboratory stands in the educational process of bachelors of the specialty 5B070200 "Automation and Control". At the department "Automation of production processes" (APP) of KSTU widely used laboratory complexes based on the equipment of world companies. The goals and objectives of the development of a new teaching and laboratory stand are determined. Studies of the selected programmable logic controller (PLC) are performed. PLC-compatible hardware and programming environment for the PLC is searched. The laboratory stand “Mechanical processing area” is selected as the control object. A flowchart of the control object and its control system have been developed. The main goal is the creation of a laboratory and methodological complex for studying the stand “Control system based on a Mitsubishi FХ5U controller” to control a real object — a belt conveyor made by Fischer Technik.

The article defines the composition of quality indicators and presents their main characteristics that have a direct impact on the quality of innovative software products used in the economic sphere. Quantitative values ​​of these characteristics can be obtained using appropriate mathematical tools. Therefore, to assess the quality of innovative software products, it is proposed to use a multi-criteria expert system and mathematical tools using weighting coefficients of indicators and scoring their variable characteristics.

Three-phase systems and processing of materials in them have very wide spread occurance. As authors note, the main advantage of three-phase systems is high extent of extraction of a target component

The main objective of this study is to present the sphere of housing and communal services as a system for modeling the activities of industry subsystems. The object of this study is the sphere of housing and communal services, and as a subject the features of the approach to modeling the activity of sectoral subsystems are determined. The methodological basis of the research was formed by the basic principles of the theory of operations research and the methods of economic and mathematical modeling. As a result of the research, theoretical rationale was obtained for the formation of models of sectoral subsystems in the housing and utilities sector. The novelty of the obtained results consists in the representation of the sphere of housing and communal services as a complex system and the allocation in its composition of sectoral subsystems for which theoretical approaches to their modeling were formulated.